Page :
Homepage
/
/
LynX - Hybrid pixel detectors for X-ray
All categories

LynX - Hybrid pixel detectors for X-ray

ASI’ s LynX detector series are hybrid pixel area detectors, with a pixel pitch of 55 µm,suitable for a wide range of applications.The capability of the LynX detectors to discriminate or measure energy of X-rays in each of its 512 x 512 pixels offers unprecedented possibilities for X-ray detection, imaging and tomography.LynX sensors (Si, GaAs, CdTe) are divided into an array of pixels and connected via bump-bonds to the readout electronics integrated in the chips below the sensor.
Product model:
Product description
Parameters

ASI’ s LynX detector series are hybrid pixel area detectors, with a pixel pitch of 55 µm,suitable for a wide range of applications.The capability of the LynX detectors to discriminate or measure energy of X-rays in each of its 512 x 512 pixels offers unprecedented possibilities for X-ray detection, imaging and tomography.LynX sensors (Si, GaAs, CdTe) are divided into an array of pixels and connected via bump-bonds to the readout electronics integrated in the chips below the sensor.

● LynX 120 is based on the Timepix ASIC.Each pixel either counts the number of detected events, measures the amount of energy deposited in the pixel or measures the time of arrival of the detected photon. The readout provides frame rates up to 120 frames/s.

● LynX 1800 is based on the Medipix3RX ASIC and has improved speed. In continuous read out mode up to 1800 frames/s with zero dead time can be recorded. In charge summing mode improved spectroscopic performance is achieved, avoiding loss of energy because of pixel to pixel charge sharing.

● In addition, the LynX 1800s which is also based on Medipix3RX but with bumps every 110 µm is also available. In charge summing mode, it has 4 energy thresholds allowing to count X-rays of different energy windows in a single measurement.

 

Advantages Hybrid Pixel Detector

● Direct, single photon detection

● Excellent point spread function

● Zero noise, high S/N and high dynamic range

● Short read out time and high frame rates

● Modular detectors, enabling large active area

● Increased high energy efficiency with high Z sensor materials

 

Applications

● Phase Contrast Imaging (Ptychography, Grating Interferometry)    

● Scanning SAXS/WAXS Imaging Small-Angle X-ray Scattering

● X-ray Diffraction

● Time Resolved Experiments

● X-ray and medical imaging

● Macromolecular Crystallography

● Tomography

● Large areas

 

 

Specifications

Sensor: 300μm Sistandard

              500μm GaAs

             1000μm CdTe

 

 

 

 

 

 

 

 

 

 

 

 

Main product specifications for X-ray

 

 

LynX 120

Timepix

LynX1800

Medipix3RX

LynX 1800s

Medipix3RX

LynX T3

Timepix3

Pixel pitch

55μm

55μm

110μm

55μm

Pixels(***)

512 x 512 (quad)

512 x 512 (quad)

256 x256 (quad)

512 x 512 (quad)

Sensitive Area

2.8 x 2.8 cm

2.8 x 2.8 cm

2.8 x 2.8 cm

2.8 x 2.8 cm

No. Of thresholds

1

1or2

4or8

1

Time resolution

20ns

na

na

1.6ns

Read-out time

8ms

0(cont,readout)

0(cont,readout)

na

Dimensions(mm)

10036(46)50

(est,bias)

2708580

2708580

2708580

Operation

Counting, TOA, TOT

Counting, CSM

SPM,CSM

  Simultaneous,  TOA, TOT

(***)Pixel size is optional

 

ASI Ltd in the Netherlands also supply TPX3Cam which is a fast optical camera for time stamping of optical photons. It is based on a new silicon pixel sensor, which in combination with the Timepix3 ASIC and readout, is suitable for a wide range of applications which require time-resolved imaging of electrons, ions or single photons. And ASI's Chee-tah is a hybrid pixel Detector Camera suitable for electron microscope applications. Chee-tah's superior sensitivity and speed offer unprecedented possibilities for obtaining electron diffraction, imaging, and tomography, which are commonly used in diffraction experiments. Chee-tah's high-speed features make it an ideal tool for observing dynamic processes and capturing rapidly decaying signals. Please see the Chee-tah family of hybrid pixel detectors.

Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table
搜索
Search

Nanjing Tansi Technology Co.,Ltd.

FAX:025-83353938

ZIP: 210009

ADD:2-728b, Hongqiao center, new City Plaza, 281 Zhongshan North Road, Nanjing

E-mail:sales@ywm01.cn  

Tansi Beijing Office

TEL: 010-62908712

FAX:025-83353938

ZIP: 100085

ADD:No.15, information road, Haidian District, Beijing

E-mail:sales@ywm01.cn 

© 2019 ywm01.cn Copyright 苏ICP备05020058号